Russwood supplies a wide range of hardwax oils for finishing and maintenance of solid and engineered wood floors. These low cost oils are easy to apply and maintain. Delivery is available nationwide.

The benefits of using Russwood Hardwax Oil include:

• Satin matt finish - extremely wear-resistant.
• Easy to apply - just three thin coats, no primer.
• Easy to maintain.
• Various Colours.
• 5L will cover approx. 60m² with three coats.
• Penetrates deeply into the wood keeping it healthy and allowing the wood to breathe.
• Microporous - will not crack, flake, peel or blister
• Easy to clean - washable.
• Stain resistant against wine, beer, cola, coffee, tea, fruit juices, milk and water.

To Apply

For each coat, stir well then apply a thin coat with a stiff brush thoroughly and evenly along the wood grain. Remove all surplus. Leave to dry for about 10-12 hours. Lightly sand between coats. After all coats have been applied allow to dry for up to 24 hours, ensure good ventilation at all times.

To Clean

For everyday cleaning a duster, mop or vacuum cleaner will be sufficient.

To Renovate

Just apply a further coat of hardwax oil or maintenance oil on a clean dry surface. A light sanding beforehand may be required to remove any dirt or grime.