Mix 250ml of the 1 litre bottle of SiOO:X maintenance wash to 5ltr of clean water. This will give a coverage rate of 35m2 per 5ltr. Note that porosity of the timber will affect the above coverage rate.
Stir to allow both products to mix together. Apply the diluted cleaner to the area using a soft bristle brush (car washing brush is perfect).
Once the cleaner has been applied it will start to aerate & foam up on the surface. It is extremely important to leave the cleaner on the surface for a minimum of 20 minutes.
Clean the surface with clean water. For any persistent surface dirt & algae re-apply the above. Allow all cleaned surfaces to dry.
Re-apply a full bodied coat of SiOO:X Surface Protection to all areas including any end grain and cross cut sections.
Click here to visit the SiOO:X website for more information.